Workshop Air Cleaners

2500 CFM of filtered air prevents clouds of welding smoke, paint over spray and sanding dust. Dramatically reduces the build up of dust on rafters, lights and other horizontal surfaces. Makes the air in your shop 75% to 90% cleaner without using exhaust fans. The MAX 251 workshop air cleaner is supplied with a change filter indicating gauge, 4-eight foot lengths of chain for hanging, a washable pre-filter and axial filter. Wash the pre-filter and axial filter after each 5-6 weeks of use. Replace the primary bag filter annually. One MAX 251 for each 1600-2000 square feet of shop area. Multiple units required in larger workshops.

Features:

• Three-Stage Air Filtration
• Washable Pre-filters
• Change Filter Indicator Gauge
• Primary filter lasts for one year without maintenance.
• Power to clean 1600-2000 square feet of shop area.
• Eyebolts pre-installed for easy unit installation.
• Four 8-ft lengths of chain included for hanging unit.
• 8-ft Power Cord

The US2850 workshop air cleaner is in essence the same as the MAX 251, except that it has a larger blower. This unit has an air filtration rate of 2850 cubic feet of air per minute. One unit is suitable for auto body repair, welding, and woodworking shops ranging from 2200 to 2600 sq. ft. Multiple units are required in larger areas. The filters consist of a 1" and 2" washable prefilter requiring cleaning by garden hose each 4-6 weeks of use. The primary multi-pocket deep bag filter requires replacement at least once each year. The US2850 workshop air cleaner comes ready to hang with all filters installed, a change filter indicator gauge, eyebolts, and 8ft. of power cord.

Features:

• Three-Stage Air Filtration
• Washable Pre-filters
• Change Filter Indicator Gauge
• 3/4HP, zero-maintenance, blower motor.
• Primary filter lasts for one year without maintenance.
• Power to clean 2200-2600 square feet of shop area.
• Eyebolts pre-installed for easy unit installation.
• 8-ft Power Cord

The US1500 workshop air cleaner has an air filtration rate of 1500 cubic feet of air each minute. It is suitable for auto body repair, welding, and woodworking shops ranging from 800 to 1600 sq. ft. The filters consist of a 2" washable prefilter requiring cleaning with a garden hose each 4-6 weeks. The primary multi-pocket deep bag filter should be replaced at least once each year. The unit comes equipped with all filters, an 8ft. power cord, and eyebolts for hanging.

Features:

• Two-Stage Air Filtration
• Washable Pre-filter
• Change Filter Indicator Gauge
• 1/3HP, zero-maintenance, blower motor.
• Primary filter lasts for one year without maintenance.
• Power to clean 800-1600 square feet of shop area.
• Eyebolts pre-installed for easy unit installation.
• 8-ft Power Cord